Problème de son dans ubuntu

Crampe · Février 4, 2009, 10:00

Bon voilà j’ai un problème sur ubuntu j’ai aucun son. Dans asoundconf list ma carte n’apparaît pas alors qu’elle apparaît quand je demande un diagnostique… Que puis-je faire sâchant que je touche pour la première fois à linux de ma vie ?
merci d’avance.

ZGoblin · Février 5, 2009, 7:36

[quote=“Crampe, post:1, topic: 49062”]Bon voilà j’ai un problème sur ubuntu j’ai aucun son. Dans asoundconf list ma carte n’apparaît pas alors qu’elle apparaît quand je demande un diagnostique… Que puis-je faire sâchant que je touche pour la première fois à linux de ma vie ?
merci d’avance.[/quote]
Tu pourrais commencer par nous donner la version d’Ubuntu, le nom de ton matos, le résultat des commandes suivantes :

dmesg lsusb lspci
Qu’a tu comme options dans le fenêtre de configuration : Système -> Préférence -> Sélecteur de système multimédia ?

Monsieur_Max · Février 5, 2009, 8:46

ZGoblin, tu es trop gentil…

Crampe, bonjour.
Je ne saurai que trop te conseiller de commencer par aller sur le site de la communauté Ubuntu, qui est une source inépuisable d’informations.
Commence par chercher comment résoudre ton problème tout seul. Dis toi que le problème que tu rencontres, d’autres personnes l’ont eu et l’ont solutionné. Il y a donc toujours un article, un guide, une FAQ ou un sujet dans un forum pour te débloquer.
Dans la communauté Linux, on te dira RTFM dès que tu poseras la moindre question.

KohgnaK · Février 5, 2009, 8:55

ZGoblin vient juste de prouver le contraire =)

A reformuler en : ‹ Dans la communauté Linux, on suppose que t’as fait quelques recherches (notamment dans la doc très bien fichue in this case) avant de poser une question ›

Bon courage crampe sinon

KohgnaK-qui-s’est-levé-trois-fois-du-pied-gauche-ss’matin.

astro · Février 5, 2009, 9:59

C’est sûr que c’est bien les faq manuels et autres, mais après faut pas s’étonner que la plupart soient découragés si on leur dit ça à chaque fois « RTFM ». Ca c’est bien quand les gens s’y connaissent, savent chercher (ça s’apprend au fur et à mesure, ça peut pas venir tout de suite). Et ça allait très bien quand 1% de la population touchait à un os alternatif, et que ce 1% s’y connaissait à peu près. Mais c’est pas comme ça que linux deviendra « grand publique » .

Bon je suis un peu HS quand même. Pour ton problème comme ça a déjà été dit tu peux (malgré tout ce que j’ai dit ) chercher sur le site d’ubuntu qui est effectivement très complet.
Sinon comme ZGoblin, plus d’infos sur ton matos seraient les bienvenues.
Bienvenue sur geekzone et bon courage :crying:.

unrealdtc · Février 5, 2009, 10:19

Heureusement que les choses ont bien évolué depuis.

astro · Février 5, 2009, 10:38

hehe je suis pas allé chercher de chiffres j’avoue :).

ZGoblin · Février 5, 2009, 10:40

Il débute, faut lui apprendre les bons réflexes . Mais comme le dit Monsieur_Max, en cas de problème, recherche d’abord sur le Wiki d’Ubuntu-fr :
[ul]
[li]http://doc.ubuntu-fr.org/son[/li][li]http://doc.ubuntu-fr.org/son_problemes[/li][/ul]
et aussi sur les forums :
[ul]
[li]http://www.google.fr/search?q=problèm…m.ubuntu-fr.org[/li][/ul]

Crampe · Février 5, 2009, 3:44

Merci pour vos réponses à tous
J’ai déjà tenté de résoudre le problème en m’appuyant sur des aides sur ubuntu-fr, mais sans succès. Sur les forums j’ai lancé un sujet mais personne ne me réponds plus. Bref…

Ma version d’ubuntu est la 8.10, ma carte son est une Sound Blaster Audigy 2 qui marche parfaitement sur xp.

Maintenant le gros du truc:

Pour dmesg ça donne ça:
[codebox][ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe8cc00 (usable)
[ 0.000000] BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fe8ec00 - 000000003fe90c00 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fe90c00 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3fe8c max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 3f66a000 - 3fe7c5b9
[ 0.000000] Allocated new RAMDISK: 005c6000 - 00dd85b9
[ 0.000000] Move RAMDISK from 000000003f66a000 - 000000003fe7c5b8 to 005c6000 - 00dd85b8
[ 0.000000] ACPI: RSDP 000FEBF0, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 000FCCBE, 003C (r1 DELL 8400 7 ASL 61)
[ 0.000000] ACPI: FACP 000FCCFA, 0074 (r1 DELL 8400 7 ASL 61)
[ 0.000000] ACPI: DSDT FFFC67D1, 2AEE (r1 DELL dt_ex 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 3FE8CC00, 0040
[ 0.000000] ACPI: SSDT FFFC92BF, 00A7 (r1 DELL st_ex 1000 MSFT 100000D)
[ 0.000000] ACPI: APIC 000FCD6E, 0072 (r1 DELL 8400 7 ASL 61)
[ 0.000000] ACPI: BOOT 000FCDE0, 0028 (r1 DELL 8400 7 ASL 61)
[ 0.000000] ACPI: MCFG 000FCE08, 003E (r1 DELL 8400 7 ASL 61)
[ 0.000000] ACPI: HPET 000FCE46, 0038 (r1 DELL 8400 7 ASL 61)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==> [0000100000 - 00005c29e0]
[ 0.000000] #4 [00005c3000 - 00005c6000] INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00005c6000 - 0000dd85b9] NEW RAMDISK ==> [00005c6000 - 0000dd85b9]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 → 0x00001000
[ 0.000000] Normal 0x00001000 → 0x00038000
[ 0.000000] HighMem 0x00038000 → 0x0003fe8c
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 → 0x000000a0
[ 0.000000] 0: 0x00000100 → 0x0003fe8c
[ 0.000000] On node 0 totalpages: 261676
[ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000000
[ 0.000000] DMA zone: 3964 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 32111 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259375
[ 0.000000] Kernel command line: root=UUID=3C24889E24885D30 loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio quiet splash
[ 0.000000] Enabling fast FPU save and restore… done.
[ 0.000000] Enabling unmasked SIMD FPU exception support… done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2992.418 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1023000k/1047088k available (2576k kernel code, 23392k reserved, 1165k data, 424k init, 129584k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB)
[ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency… 5984.83 BogoMIPS (lpj=11969672)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] Checking ‹ hlt › instruction… OK.
[ 0.016585] SMP alternatives: switching to UP code
[ 0.024008] ACPI: Core revision 20080609
[ 0.040837] ACPI: Checking initramfs for custom DSDT
[ 0.402015] ENABLING IO-APIC IRQs
[ 0.402187] …TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.441882] CPU0: Intel® Pentium® 4 CPU 3.00GHz stepping 04
[ 0.444027] Brought up 1 CPUs
[ 0.444027] Total of 1 processors activated (5984.83 BogoMIPS).
[ 0.444027] CPU0 attaching NULL sched-domain.
[ 0.444027] net_namespace: 840 bytes
[ 0.444027] Booting paravirtualized kernel on bare hardware
[ 0.444027] Time: 16:33:45 Date: 02/05/09
[ 0.444027] NET: Registered protocol family 16
[ 0.444027] EISA bus registered
[ 0.444027] ACPI: bus type pci registered
[ 0.444027] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.444027] PCI: MCFG area at e0000000 reserved in E820
[ 0.444027] PCI: Using MMCONFIG for extended config space
[ 0.444027] PCI: Using configuration type 1 for base access
[ 0.444027] ACPI: EC: Look up EC in DSDT
[ 0.468876] ACPI: Interpreter enabled
[ 0.468884] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.468907] ACPI: Using IOAPIC for interrupt routing
[ 0.507333] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.507479] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.507485] pci 0000:00:01.0: PME# disabled
[ 0.507561] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.507566] pci 0000:00:1c.0: PME# disabled
[ 0.507616] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.507621] pci 0000:00:1c.1: PME# disabled
[ 0.507662] PCI: 0000:00:1d.0 reg 20 io port: [ff80, ff9f]
[ 0.507712] PCI: 0000:00:1d.1 reg 20 io port: [ff60, ff7f]
[ 0.507763] PCI: 0000:00:1d.2 reg 20 io port: [ff40, ff5f]
[ 0.507812] PCI: 0000:00:1d.3 reg 20 io port: [ff20, ff3f]
[ 0.507865] PCI: 0000:00:1d.7 reg 10 32bit mmio: [ffa80800, ffa80bff]
[ 0.507913] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.507918] pci 0000:00:1d.7: PME# disabled
[ 0.507983] PCI: 0000:00:1e.2 reg 10 io port: [ec00, ecff]
[ 0.508040] PCI: 0000:00:1e.2 reg 14 io port: [e8c0, e8ff]
[ 0.508047] PCI: 0000:00:1e.2 reg 18 32bit mmio: [dffffa00, dffffbff]
[ 0.508054] PCI: 0000:00:1e.2 reg 1c 32bit mmio: [dffff900, dffff9ff]
[ 0.508081] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.508085] pci 0000:00:1e.2: PME# disabled
[ 0.508152] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.508157] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.508176] PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7]
[ 0.508185] PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7]
[ 0.508192] PCI: 0000:00:1f.1 reg 18 io port: [170, 177]
[ 0.508199] PCI: 0000:00:1f.1 reg 1c io port: [374, 377]
[ 0.508206] PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
[ 0.508248] PCI: 0000:00:1f.2 reg 10 io port: [fe00, fe07]
[ 0.508254] PCI: 0000:00:1f.2 reg 14 io port: [fe10, fe13]
[ 0.508261] PCI: 0000:00:1f.2 reg 18 io port: [fe20, fe27]
[ 0.508267] PCI: 0000:00:1f.2 reg 1c io port: [fe30, fe33]
[ 0.508274] PCI: 0000:00:1f.2 reg 20 io port: [fea0, feaf]
[ 0.508280] PCI: 0000:00:1f.2 reg 24 32bit mmio: [dffffc00, dfffffff]
[ 0.508298] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.508302] pci 0000:00:1f.2: PME# disabled
[ 0.508345] PCI: 0000:00:1f.3 reg 20 io port: [e8a0, e8bf]
[ 0.508395] PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, d7ffffff]
[ 0.508401] PCI: 0000:01:00.0 reg 14 io port: [dc00, dcff]
[ 0.508408] PCI: 0000:01:00.0 reg 18 32bit mmio: [dfde0000, dfdeffff]
[ 0.508425] PCI: 0000:01:00.0 reg 30 32bit mmio: [dfe00000, dfe1ffff]
[ 0.508442] pci 0000:01:00.0: supports D1
[ 0.508444] pci 0000:01:00.0: supports D2
[ 0.508467] PCI: 0000:01:00.1 reg 10 32bit mmio: [dfdf0000, dfdfffff]
[ 0.508504] pci 0000:01:00.1: supports D1
[ 0.508506] pci 0000:01:00.1: supports D2
[ 0.508546] PCI: bridge 0000:00:01.0 io port: [d000, dfff]
[ 0.508550] PCI: bridge 0000:00:01.0 32bit mmio: [dfd00000, dfefffff]
[ 0.508554] PCI: bridge 0000:00:01.0 32bit mmio pref: [d0000000, d7ffffff]
[ 0.508617] PCI: 0000:02:00.0 reg 10 64bit mmio: [dfcf0000, dfcfffff]
[ 0.508671] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.508677] pci 0000:02:00.0: PME# disabled
[ 0.508714] PCI: bridge 0000:00:1c.0 32bit mmio: [dfc00000, dfcfffff]
[ 0.508762] PCI: bridge 0000:00:1c.1 32bit mmio: [dfb00000, dfbfffff]
[ 0.508802] PCI: 0000:04:00.0 reg 10 32bit mmio: [dfafb000, dfafbfff]
[ 0.508848] pci 0000:04:00.0: supports D1
[ 0.508850] pci 0000:04:00.0: supports D2
[ 0.508853] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.508857] pci 0000:04:00.0: PME# disabled
[ 0.508888] PCI: 0000:04:01.0 reg 10 io port: [ccc0, ccff]
[ 0.508934] pci 0000:04:01.0: supports D1
[ 0.508936] pci 0000:04:01.0: supports D2
[ 0.508968] PCI: 0000:04:01.2 reg 10 32bit mmio: [dfafa800, dfafafff]
[ 0.508976] PCI: 0000:04:01.2 reg 14 32bit mmio: [dfafc000, dfafffff]
[ 0.509019] pci 0000:04:01.2: supports D1
[ 0.509021] pci 0000:04:01.2: supports D2
[ 0.509023] pci 0000:04:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.509028] pci 0000:04:01.2: PME# disabled
[ 0.509076] pci 0000:00:1e.0: transparent bridge
[ 0.509081] PCI: bridge 0000:00:1e.0 io port: [c000, cfff]
[ 0.509085] PCI: bridge 0000:00:1e.0 32bit mmio: [dfa00000, dfafffff]
[ 0.509109] bus 00 → node 0
[ 0.509117] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PRT]
[ 0.509683] ACPI: PCI Interrupt Routing Table [_SB.PCI0.PCI1.PRT]
[ 0.510370] ACPI: PCI Interrupt Routing Table [_SB.PCI0.PCI2.PRT]
[ 0.510699] ACPI: PCI Interrupt Routing Table [_SB.PCI0.PCI3.PRT]
[ 0.511027] ACPI: PCI Interrupt Routing Table [_SB.PCI0.PCI4._PRT]
[ 0.803161] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.803528] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.803889] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.804256] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.804623] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.804983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.805346] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.805708] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.806002] Linux Plug and Play Support v0.97 © Adam Belay
[ 0.806051] pnp: PnP ACPI init
[ 0.806062] ACPI: bus type pnp registered
[ 0.810585] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.810590] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 0.832704] pnp: PnP ACPI: found 13 devices
[ 0.832708] ACPI: ACPI bus type pnp unregistered
[ 0.832713] PnPBIOS: Disabled by ACPI PNP
[ 0.833197] PCI: Using ACPI for IRQ routing
[ 0.833346] NET: Registered protocol family 8
[ 0.833346] NET: Registered protocol family 20
[ 0.833346] NetLabel: Initializing
[ 0.833346] NetLabel: domain hash size = 128
[ 0.833346] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.833346] NetLabel: unlabeled traffic allowed by default
[ 0.833346] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.833346] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.834193] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.834195] actual entries 65620
[ 0.834308] AppArmor: AppArmor Filesystem Enabled
[ 0.834332] ACPI: RTC can wake from S4
[ 0.834341] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 0.834341] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.834341] system 00:0a: iomem range 0x100000-0xffffff could not be reserved
[ 0.834341] system 00:0a: iomem range 0x1000000-0x3fe8cbff could not be reserved
[ 0.834341] system 00:0a: iomem range 0xc0000-0xfffff could not be reserved
[ 0.834341] system 00:0a: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.834341] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.834341] system 00:0a: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 0.834341] system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.834341] system 00:0a: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.834341] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.834341] system 00:0b: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 0.836047] Switched to high resolution mode on CPU 0
[ 0.871188] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.871193] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.871198] pci 0000:00:01.0: MEM window: 0xdfd00000-0xdfefffff
[ 0.871202] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.871208] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.871211] pci 0000:00:1c.0: IO window: disabled
[ 0.871216] pci 0000:00:1c.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.871221] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.871227] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.871229] pci 0000:00:1c.1: IO window: disabled
[ 0.871235] pci 0000:00:1c.1: MEM window: 0xdfb00000-0xdfbfffff
[ 0.871239] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.871246] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.871250] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.871255] pci 0000:00:1e.0: MEM window: 0xdfa00000-0xdfafffff
[ 0.871260] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.871276] pci 0000:00:01.0: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 0.871281] pci 0000:00:01.0: setting latency timer to 64
[ 0.871290] pci 0000:00:1c.0: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 0.871295] pci 0000:00:1c.0: setting latency timer to 64
[ 0.871304] pci 0000:00:1c.1: PCI INT B → GSI 17 (level, low) → IRQ 17
[ 0.871308] pci 0000:00:1c.1: setting latency timer to 64
[ 0.871316] pci 0000:00:1e.0: setting latency timer to 64
[ 0.871321] bus: 00 index 0 io port: [0, ffff]
[ 0.871323] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.871326] bus: 01 index 0 io port: [d000, dfff]
[ 0.871328] bus: 01 index 1 mmio: [dfd00000, dfefffff]
[ 0.871331] bus: 01 index 2 mmio: [d0000000, d7ffffff]
[ 0.871333] bus: 01 index 3 mmio: [0, 0]
[ 0.871335] bus: 02 index 0 mmio: [0, 0]
[ 0.871337] bus: 02 index 1 mmio: [dfc00000, dfcfffff]
[ 0.871340] bus: 02 index 2 mmio: [0, 0]
[ 0.871341] bus: 02 index 3 mmio: [0, 0]
[ 0.871343] bus: 03 index 0 mmio: [0, 0]
[ 0.871346] bus: 03 index 1 mmio: [dfb00000, dfbfffff]
[ 0.871348] bus: 03 index 2 mmio: [0, 0]
[ 0.871350] bus: 03 index 3 mmio: [0, 0]
[ 0.871352] bus: 04 index 0 io port: [c000, cfff]
[ 0.871355] bus: 04 index 1 mmio: [dfa00000, dfafffff]
[ 0.871357] bus: 04 index 2 mmio: [0, 0]
[ 0.871359] bus: 04 index 3 io port: [0, ffff]
[ 0.871361] bus: 04 index 4 mmio: [0, ffffffff]
[ 0.871372] NET: Registered protocol family 2
[ 0.871543] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.871853] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.872234] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.872465] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.872468] TCP reno registered
[ 0.872624] NET: Registered protocol family 1
[ 0.872777] checking if image is initramfs… it is
[ 1.570450] Freeing initrd memory: 8265k freed
[ 1.570602] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 1.570606] Simple Boot Flag at 0x7a set to 0x1
[ 1.571211] audit: initializing netlink socket (disabled)
[ 1.571227] type=2000 audit(1233851625.568:1): initialized
[ 1.576516] highmem bounce pool size: 64 pages
[ 1.576525] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.579257] VFS: Disk quotas dquot_6.5.1
[ 1.579363] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.579485] msgmni has been set to 1761
[ 1.579635] io scheduler noop registered
[ 1.579639] io scheduler anticipatory registered
[ 1.579641] io scheduler deadline registered
[ 1.579656] io scheduler cfq registered (default)
[ 1.579750] pci 0000:01:00.0: Boot video device
[ 1.579873] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.579912] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.579945] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.580015] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.580116] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.580151] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.580189] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.580243] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.580297] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.580403] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.580438] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.580473] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.580529] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.580586] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.580989] isapnp: Scanning for PnP cards…
[ 1.932668] isapnp: No Plug & Play device found
[ 1.981171] hpet_resources: 0xfed00000 is busy
[ 1.981235] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.981376] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.982248] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.984818] brd: module loaded
[ 1.984903] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.985058] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[ 1.985062] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.985645] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.986007] mice: PS/2 mouse device common for all mice
[ 1.986178] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.986203] rtc0: alarms up to one day, hpet irqs
[ 1.986359] EISA: Probing bus 0 at eisa.0
[ 1.986388] EISA: Detected 0 cards.
[ 1.986392] cpuidle: using governor ladder
[ 1.986395] cpuidle: using governor menu
[ 1.987010] TCP cubic registered
[ 1.987043] Using IPI No-Shortcut mode
[ 1.987277] registered taskstats version 1
[ 1.987420] Magic number: 13:76:590
[ 1.987464] tty ptyc8: hash matches
[ 1.987535] rtc_cmos 00:05: setting system clock to 2009-02-05 16:33:46 UTC (1233851626)
[ 1.987539] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.987541] EDD information not available.
[ 1.987791] Freeing unused kernel memory: 424k freed
[ 1.987852] Write protecting the kernel text: 2580k
[ 1.987887] Write protecting the kernel read-only data: 940k
[ 2.019023] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.224043] fuse init (API version 7.9)
[ 2.476022] processor ACPI0007:00: registered as cooling_device0
[ 3.068117] tg3.c:v3.94 (August 14, 2008)
[ 3.068134] tg3 0000:02:00.0: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 3.068145] tg3 0000:02:00.0: setting latency timer to 64
[ 3.103377] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:11:59:a8:9e
[ 3.103383] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 3.103386] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.152527] usbcore: registered new interface driver usbfs
[ 3.152558] usbcore: registered new interface driver hub
[ 3.164082] usbcore: registered new device driver usb
[ 3.172969] ehci_hcd 0000:00:1d.7: PCI INT A → GSI 21 (level, low) → IRQ 21
[ 3.172984] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.172988] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.173042] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.176962] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.176969] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 3.176983] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
[ 3.188137] USB Universal Host Controller Interface driver v3.0
[ 3.213202] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.213385] usb usb1: configuration #1 chosen from 1 choice
[ 3.213423] hub 1-0:1.0: USB hub found
[ 3.213435] hub 1-0:1.0: 8 ports detected
[ 3.260650] No dock devices found.
[ 3.300406] SCSI subsystem initialized
[ 3.365275] libata version 3.00 loaded.
[ 3.424339] uhci_hcd 0000:00:1d.0: PCI INT A → GSI 21 (level, low) → IRQ 21
[ 3.424350] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.424355] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.424387] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.424415] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 3.424527] usb usb2: configuration #1 chosen from 1 choice
[ 3.424563] hub 2-0:1.0: USB hub found
[ 3.424574] hub 2-0:1.0: 2 ports detected
[ 3.528363] uhci_hcd 0000:00:1d.1: PCI INT B → GSI 22 (level, low) → IRQ 22
[ 3.528375] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.528379] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.528411] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.528445] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 3.528554] usb usb3: configuration #1 chosen from 1 choice
[ 3.528592] hub 3-0:1.0: USB hub found
[ 3.528603] hub 3-0:1.0: 2 ports detected
[ 3.736619] uhci_hcd 0000:00:1d.2: PCI INT C → GSI 18 (level, low) → IRQ 18
[ 3.736631] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.736635] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.736671] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.736705] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 3.736829] usb usb4: configuration #1 chosen from 1 choice
[ 3.736869] hub 4-0:1.0: USB hub found
[ 3.736879] hub 4-0:1.0: 2 ports detected
[ 3.840286] uhci_hcd 0000:00:1d.3: PCI INT D → GSI 23 (level, low) → IRQ 23
[ 3.840297] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.840301] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.840334] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.840368] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 3.840481] usb usb5: configuration #1 chosen from 1 choice
[ 3.840518] hub 5-0:1.0: USB hub found
[ 3.840528] hub 5-0:1.0: 2 ports detected
[ 3.848026] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 3.944409] ata_piix 0000:00:1f.1: version 2.12
[ 3.944421] ata_piix 0000:00:1f.1: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 3.944463] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.945304] scsi0 : ata_piix
[ 3.945420] scsi1 : ata_piix
[ 3.945469] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.945473] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.023650] usb 3-2: configuration #1 chosen from 1 choice
[ 4.108351] ata1.00: ATAPI: SAMSUNG CDRW/DVD SM-352F, T902, max UDMA/33
[ 4.124287] ata1.00: configured for UDMA/33
[ 4.124330] ata2: port disabled. ignoring.
[ 4.124871] scsi 0:0:0:0: CD-ROM SAMSUNG CDRW/DVD SM-352F T902 PQ: 0 ANSI: 5
[ 4.124991] ahci 0000:00:1f.2: version 3.0
[ 4.125006] ahci 0000:00:1f.2: PCI INT C → GSI 20 (level, low) → IRQ 20
[ 4.125086] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 4.125091] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 4.125096] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.125967] scsi2 : ahci
[ 4.126421] scsi3 : ahci
[ 4.126894] scsi4 : ahci
[ 4.127382] scsi5 : ahci
[ 4.127437] ata3: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffd00 irq 20
[ 4.127442] ata4: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffd80 irq 20
[ 4.127446] ata5: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffe00 irq 20
[ 4.127449] ata6: SATA max UDMA/133 abar m1024@0xdffffc00 port 0xdffffe80 irq 20
[ 4.444021] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.444641] ata3.00: ATA-7: Maxtor 6Y160M0, YAR51HW0, max UDMA/133
[ 4.444645] ata3.00: 312500000 sectors, multi 0: LBA48
[ 4.445398] ata3.00: configured for UDMA/133
[ 4.780018] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.116018] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.452019] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.468127] scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y160M0 YAR5 PQ: 0 ANSI: 5
[ 5.469380] ohci1394 0000:04:00.0: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 5.521120] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[dfafb000-dfafb7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 5.534494] ohci1394 0000:04:01.2: PCI INT B → GSI 18 (level, low) → IRQ 18
[ 5.584244] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[dfafa800-dfafafff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.652958] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 5.653005] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.697198] usbcore: registered new interface driver hiddev
[ 5.709812] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2
[ 5.714145] Driver ‹ sr › needs updating - please use bus_type methods
[ 5.716279] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2
[ 5.716307] usbcore: registered new interface driver usbhid
[ 5.716312] usbhid: v2.6:USB HID core driver
[ 5.716628] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[ 5.716633] Uniform CD-ROM driver Revision: 3.20
[ 5.716729] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 5.737404] Driver ‹ sd › needs updating - please use bus_type methods
[ 5.737526] sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 5.737551] sd 2:0:0:0: [sda] Write Protect is off
[ 5.737555] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.737595] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 5.737677] sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 5.737699] sd 2:0:0:0: [sda] Write Protect is off
[ 5.737702] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.737741] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 5.737747] sda: sda1
[ 5.747446] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.333317] loop: module loaded
[ 6.382299] kjournald starting. Commit interval 5 seconds
[ 6.382318] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.804138] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000d1008083d7bc]
[ 6.856136] ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c041108b6a0]
[ 11.306652] udevd version 124 started
[ 12.084149] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.116225] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.352148] iTCO_vendor_support: vendor-support=0
[ 12.381222] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 12.384421] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
[ 12.384540] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.604175] intel_rng: Firmware space is locked read-only. If you can’t or
[ 12.604177] intel_rng: don’t want to disable this in firmware setup, and if
[ 12.604179] intel_rng: you are certain that your system has a functional
[ 12.604180] intel_rng: RNG, try using the ‹ no_fwh_detect › option.
[ 12.768263] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 12.784035] ACPI: Power Button (FF) [PWRF]
[ 12.784164] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.796038] ACPI: Power Button (CM) [VBTN]
[ 13.500238] parport_pc 00:08: reported by Plug and Play ACPI
[ 13.500295] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 13.632089] Linux agpgart interface v0.103
[ 14.031454] fglrx: module license ‹ Proprietary. © 2002 - ATI Technologies, Starnberg, GERMANY › taints kernel.
[ 14.172290] [fglrx] Maximum main memory to use for locked dma buffers: 925 MBytes.
[ 14.172374] [fglrx] vendor: 1002 device: 554b count: 1
[ 14.172837] [fglrx] ioport: bar 1, base 0xdc00, size: 0x100
[ 14.172853] pci 0000:01:00.0: PCI INT A → GSI 16 (level, low) → IRQ 16
[ 14.172861] pci 0000:01:00.0: setting latency timer to 64
[ 14.173623] [fglrx] PAT is enabled successfully!
[ 14.173657] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
[ 14.348576] Intel ICH 0000:00:1e.2: PCI INT A → GSI 23 (level, low) → IRQ 23
[ 14.348597] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 14.376046] index: expects arguments
[ 14.376052] snd_emu10k1: ' invalid for parameter index’
[ 14.772020] intel8x0_measure_ac97_clock: measured 52417 usecs
[ 14.772025] intel8x0: clocking to 48000
[ 14.901653] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 15.207133] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 17.297313] lp0: using parport0 (interrupt-driven).
[ 18.025341] EXT3 FS on loop0, internal journal
[ 33.699644] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 33.895766] type=1505 audit(1233848058.705:2): operation=« profile_load » name="/usr/share/gdm/guest-session/Xsession" name2=« default » pid=3978
[ 34.082081] type=1505 audit(1233848058.893:3): operation=« profile_load » name="/usr/lib/cups/backend/cups-pdf" name2=« default » pid=3983
[ 34.082271] type=1505 audit(1233848058.893:4): operation=« profile_load » name="/usr/sbin/cupsd" name2=« default » pid=3983
[ 34.239611] ip_tables: © 2000-2006 Netfilter Core Team
[ 34.723273] ACPI: WMI: Mapper loaded
[ 35.928080] warning: `avahi-daemon’ uses 32-bit capabilities (legacy supportin use)
[ 36.001308] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 36.001315] apm: overridden by ACPI.
[ 36.255353] ppdev: user-space parallel port driver
[ 38.021097] Bluetooth: Core ver 2.13
[ 38.022947] NET: Registered protocol family 31
[ 38.022954] Bluetooth: HCI device and connection manager initialized
[ 38.022958] Bluetooth: HCI socket layer initialized
[ 38.038652] Bluetooth: L2CAP ver 2.11
[ 38.038658] Bluetooth: L2CAP socket layer initialized
[ 38.053674] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.053681] Bluetooth: BNEP filters: protocol multicast
[ 38.089510] Bridge firewalling registered
[ 38.101342] Bluetooth: SCO (Voice Link) ver 0.6
[ 38.101349] Bluetooth: SCO socket layer initialized
[ 38.213419] Bluetooth: RFCOMM socket layer initialized
[ 38.214276] Bluetooth: RFCOMM TTY layer initialized
[ 38.214281] Bluetooth: RFCOMM ver 1.10
[ 41.282896] [fglrx] Reserved FB block: Shared offset:0, size:40000
[ 41.282908] [fglrx] Reserved FB block: Unshared offset:7fbb000, size:44000
[ 41.282912] [fglrx] Reserved FB block: Unshared offset:7fff000, size:1000
[ 44.000904] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 44.000911] tg3: eth0: Flow control is off for TX and off for RX.
[ 44.150185] NET: Registered protocol family 17
[ 46.842594] NET: Registered protocol family 10
[ 46.844062] lo: Disabled Privacy Extensions
[ 56.912008] eth0: no IPv6 routers present
[ 166.788088] ppdev0: registered pardevice
[ 166.836030] ppdev0: unregistered pardevice
[ 168.396241] ppdev0: registered pardevice
[ 168.436414] ppdev0: unregistered pardevice
[ 168.996952] ppdev0: registered pardevice
[ 169.044956] ppdev0: unregistered pardevice[/codebox]

Pour lsub ça donne ça:

[codebox]Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical WheelMouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub[/codebox]

Pour lspci:

[codebox]00:00.0 Host bridge: Intel Corporation 82925X/XE Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82925X/XE PCI Express Root Port (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc R423 UK [Radeon X800SE (PCIE)]
01:00.1 Display controller: ATI Technologies Inc Radeon R423 UK (PCIE) [X800 SE] (Secondary)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
04:00.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
04:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
04:01.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)[/codebox]

Que faire ?

Cafeine · Février 5, 2009, 5:42

(Merci d’utiliser code comme balise et pas citation)
(codebox a l’air de déconner, je vais regarder ça)

ZGoblin · Février 5, 2009, 7:12

J’ai trouvé ça : https://bugs.launchpad.net/ubuntu/+source/linux/+bug/205108 qui ressemble bien à ton bug.

J’ai trouvé ça aussi : http://forum.ubuntu-fr.org/viewtopic.php?id=3325

Il faut que tu désactive ton chipset AC97 dans ton bios, ça devrait surement corriger le problème.

Crampe · Février 6, 2009, 8:12

Bon j’ai réussi à désactiver le chipset AC97 je crois ( c’est un bios Dell je comprend pas grand chose, j’ai fait « desactiver audio par défaut » ) et du coup maintenant dans ubuntu sur le contrôleur de son en haut de l’écran il a un panneau d’interdiction et quand je clique dessus il me dit « Aucun greffon de contrôle de volume GStreamer et/ou périphériques trouvés ».

crampi@ubuntu:~$ asoundconf list Names of available sound cards: Rien du tout :/

crampi@ubuntu:~$ lspci | grep -i audio 04:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)

Merci pour tes réponse Zgoblin en tout cas

ZGoblin · Février 6, 2009, 8:50

[quote=« Crampe, post:12, topic: 49062 »]Bon j’ai réussi à désactiver le chipset AC97 je crois ( c’est un bios Dell je comprend pas grand chose, j’ai fait « desactiver audio par défaut » ) et du coup maintenant dans ubuntu sur le contrôleur de son en haut de l’écran il a un panneau d’interdiction et quand je clique dessus il me dit « Aucun greffon de contrôle de volume GStreamer et/ou périphériques trouvés ».

crampi@ubuntu:~$ asoundconf list Names of available sound cards: Rien du tout :/

crampi@ubuntu:~$ lspci | grep -i audio 04:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)

Merci pour tes réponse Zgoblin en tout cas :crying:[/quote]

Essaye de décharger/recharger le driver :

modprobe -r snd_emu10k1 modprobe snd_emu10k1

Et donne-nous aussi le retour de la commande lsmod.

Tu peux aussi essayer la même chose avec le driver snd_emu10k2 au cas où mais je n’y crois pas trop.

La je commence à être à cours d’idée.

fser · Février 6, 2009, 11:12

Cherche une aide “physique” dans ta région. Il y a pleins d’assoc pour ça.
Liste ici (trouvetongull) ou là (aful)

Crampe · Février 9, 2009, 12:13

Alors pour modprobe -r snd_emu10k1 j’ai le message:

crampi@ubuntu:~$ modprobe -r snd_emu10k1 WARNING: Failed to open config file /etc/modprobe.d/alsa-base.save.1: Permission denied WARNING: Failed to open config file /etc/modprobe.d/alsa-base.save: Permission denied WARNING: Error removing snd_util_mem (/lib/modules/2.6.27-11-generic/kernel/sound/synth/snd-util-mem.ko): Operation not permitted WARNING: Error removing snd_hwdep (/lib/modules/2.6.27-11-generic/kernel/sound/core/snd-hwdep.ko): Operation not permitted crampi@ubuntu:~$ modprobe snd_emu10k1 WARNING: Failed to open config file /etc/modprobe.d/alsa-base.save.1: Permission denied WARNING: Failed to open config file /etc/modprobe.d/alsa-base.save: Permission denied WARNING: Failed to open config file /etc/modprobe.d/alsa-base.save.1: Permission denied WARNING: Failed to open config file /etc/modprobe.d/alsa-base.save: Permission denied FATAL: Error inserting snd_emu10k1 (/lib/modules/2.6.27-11-generic/kernel/sound/pci/emu10k1/snd-emu10k1.ko): Operation not permitted FATAL: Error running install command for snd_emu10k1

et pour lsmod

crampi@ubuntu:~$ lsmod Module Size Used by ipv6 263972 14 af_packet 25728 2 binfmt_misc 16904 1 rfcomm 44432 0 sco 18308 2 bridge 56980 0 stp 10628 1 bridge bnep 20480 2 l2cap 30464 6 rfcomm,bnep bluetooth 61924 6 rfcomm,sco,bnep,l2cap ppdev 15620 0 speedstep_lib 12676 0 cpufreq_powersave 9856 0 cpufreq_userspace 11396 0 cpufreq_ondemand 14988 0 cpufreq_conservative 14600 0 cpufreq_stats 13188 0 freq_table 12672 2 cpufreq_ondemand,cpufreq_stats container 11520 0 video 25232 0 output 11008 1 video pci_slot 12680 0 sbs 19464 0 sbshc 13440 1 sbs wmi 14504 0 battery 18436 0 iptable_filter 10752 0 ip_tables 19600 1 iptable_filter x_tables 22916 1 ip_tables ac 12292 0 sbp2 29324 0 lp 17156 0 dcdbas 15008 0 pcspkr 10624 0 evdev 17696 6 parport_pc 39204 1 snd_intel8x0 37532 3 parport 42604 3 ppdev,lp,parport_pc fglrx 1813960 26 agpgart 42184 1 fglrx snd_seq_dummy 10884 0 snd_ac97_codec 111652 1 snd_intel8x0 snd_seq_oss 38528 0 ac97_bus 9856 1 snd_ac97_codec snd_seq_midi 14336 0 snd_rawmidi 29824 1 snd_seq_midi snd_pcm_oss 46848 0 snd_mixer_oss 22784 1 snd_pcm_oss snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi button 14224 0 snd_pcm 83204 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_util_mem 12416 0 snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_hwdep 15236 0 snd_timer 29960 2 snd_pcm,snd_seq snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 63268 17 snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,sn d_pcm,snd_seq,snd_hwdep,snd_timer,snd_seq_device iTCO_wdt 18596 0 iTCO_vendor_support 11652 1 iTCO_wdt soundcore 15328 1 snd snd_page_alloc 16136 2 snd_intel8x0,snd_pcm shpchp 38036 0 pci_hotplug 34976 1 shpchp ext3 133256 1 jbd 55828 1 ext3 mbcache 16004 1 ext3 loop 23180 2 sd_mod 42392 2 crc_t10dif 9984 1 sd_mod sr_mod 22212 0 cdrom 43168 1 sr_mod usbhid 35840 0 hid 50560 1 usbhid sg 39732 0 ata_generic 12932 0 pata_acpi 12160 0 ahci 37132 0 ata_piix 24580 1 libata 178208 4 ata_generic,pata_acpi,ahci,ata_piix scsi_mod 155212 5 sbp2,sd_mod,sr_mod,sg,libata ohci1394 37936 0 dock 16656 1 libata ieee1394 96324 2 sbp2,ohci1394 uhci_hcd 30736 0 ehci_hcd 43788 0 usbcore 149360 4 usbhid,uhci_hcd,ehci_hcd tg3 129924 0 libphy 27392 1 tg3 thermal 23708 0 processor 42156 1 thermal fan 12548 0 fbcon 47648 0 tileblit 10880 1 fbcon font 16512 1 fbcon bitblit 13824 1 fbcon softcursor 9984 1 bitblit fuse 60828 5

Pour ce qui est de l’aide physique je suis pas assez motivé pour ça… Tant pis je resterai sur XP.